Home › Forums › Design and Building › 2 Stroke Amplifier Design and Building › Re: static when turning on amp

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 1, 2012 at 10:02 am #5129
    joewilly
    Participant

    I completed my 2 stroke amp a few months ago. When I first turn it on I get static for about 30 seconds and then it goes away. If I flip the on off switch the static also goes away. Is this of any concern or
    should I learn to live with it?

    December 1, 2012 at 8:03 pm #5727
    Robin
    Participant

    Check the tubes

    December 3, 2012 at 9:18 am #5728
    joewilly
    Participant

    Robin,
    I pulled out the tubes and put them back in and the static disappeared.
    Thanks for the help

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.