Home › Forums › Design and Building › 2 Stroke Amplifier Design and Building › Problem with Brass Grounding plate › Reply To: Problem with Brass Grounding plate
March 12, 2021 at 9:49 pm
#8415
Keymaster
I never use the brass plate for that reason. Its quite a bit of overkill on this amp. We recommend running a ground strap across the back of the pots that you can tie all the grounds to. Then you can tie that wire to the ground. See the attached image for an example.
-
This reply was modified 1 year, 11 months ago by
Andy.
-
This reply was modified 1 year, 11 months ago by
Andy.