Home › Forums › Design and Building › 2 Stroke Amplifier Design and Building › Older kit, need coherent instructions › Reply To: Older kit, need coherent instructions
March 19, 2021 at 10:26 am
#8426
Andy
Keymaster
Those sound about right. The tubes need 12.6VAC to run those filaments. So you will need 6.3V to pin 9 and 6.3V to pins 4-5 on the preamp to make that work and then 7 and 2 on the power tube. Your previous measure of 3.2 off each green would be problematic.