Home › Forums › Design and Building › 2 Stroke Amplifier Design and Building › 2 Stroke kit build. › Re: Re: 2 Stroke kit build.
September 24, 2014 at 1:01 am
#6016
Spooks
Participant
The amp is altogether. All that is left is the cable from the output jack to the speakers.
1. As I only have one output jack, does this mean I can only use one speaker at a time?
2. With one wire soldered to the bullet TIP
( going into the OUTPUT jack ) and the other on the ring connection. Does it matter which speaker terminal the TIP connection wire is fitted to?
Ta for all the help.