Home › Forums › Design and Building › Effects Design and Construction › AX84 Variable Bias › Re: Re: AX84 Variable Bias
June 1, 2011 at 4:06 am
#5478
Participant
Ok so the grid is at 30V. While the Pin 8 (Cathode is at 28V. I am thinking perhaps I should just try to put the grid leak right off pin 5? Right now I have a 370K Resistor running from the MV side of the grid stopper to ground. I would have thought this would have been my ground reference for the grid, but perhaps something is wrong? I will try perhaps a bit lower say 220K and directly to ground from the pin on the OT side of the grid stopper this time.