Home › Forums › Design and Building › Effects Design and Construction › AX84 Variable Bias › Re: Re: AX84 Variable Bias

June 1, 2011 at 5:47 am #5483
DeepBlue
Participant

OK So I think I might have the problem. So the Treble Cap is showing only 8V DC across it, but then has almost 182V DC from the Tone stack side to ground. The mid and bass show the opposite. The show around 130V DC across them, as you mentioned was normal, and then about 5V DC to ground. So suspecting I should checking wiring and replace the capacitor on the treble cap.