Home › Forums › Design and Building › Effects Design and Construction › Following 2 Power Tube Amp Design › Re: Re: Following 2 Power Tube Amp Design

February 17, 2011 at 2:44 am #5336
Robin
Participant

The design changed because there was not a real tonal advantage to the 2 power tube layout and you could only use 2 6v6s anyway. 2-6v6s get you to about 8 watts of power in the 2Stroke, same as 1-6L6. With the single power tube layout you still can change to all the other workable tubes:6L6, 6V6, EL34, KT-66, etc. On the other hand, there is no real down side (other than more parts) to the 2 tube version.