Home › Forums › Design and Building › 2 Stroke Amplifier Design and Building › Mojo760 PT definitely needs a ground reference › Re: Re: Mojo760 PT definitely needs a ground reference
December 29, 2011 at 6:03 am
#5551
Andy
Keymaster
That should be it. I usually place 1 100Ω resistor on each of the Lamp terminal posts where the green filament wires attach. Then the other side of the resistors I mount to the 3 post ground terminal that attaches to the PT bolt.
I took some pictures on the last build so that I could do a full tutorial. Here is one. See image for clarification. Will save a thousand words