Home › Forums › Design and Building › 2 Stroke Amplifier Design and Building › Output Transformer › Re: Re: Output Transformer
February 25, 2012 at 3:36 pm
#5582
beelzebum
Participant
In that layout, even though it doesn’t look like it, if you follow the wire from V1 pin 3. It splits to a 47uf, 25uf, and a 1.5k. The base of the 1.5k should be connected to ground along with the center pin of the boost switch. If it isn’t, then you will get the voltages that you are showing.