Home › Forums › Design and Building › 2 Stroke Amplifier Design and Building › output tube changeout › Re: Re: output tube changeout
January 5, 2013 at 12:17 am
#5738
joewilly
Participant
Bill,
I read your story of whoas. I had a few problems when I first fired up my 2 Stroke amp.I had a problem with the 9 pin preamp socket. Two of the pins were shorting against each other. Had to bend one pin and trim
excess wire protruding thru the pin.
sounds like you have the problem solved. Enjoy the tunes.
Joewilly