Home › Forums › Design and Building › 2 Stroke Amplifier Design and Building › Transformer Orientation… yet again! › Re: Re: Transformer Orientation… yet again!

January 28, 2011 at 8:18 am #5306
M Fowler
Participant

I like to use the three position impedence switch, isn’t cheap but are very well made and versitile. System would not allow me to upload a pciture http://www.mojotone.com/amp-parts/Switches/Mojotone-Impedance-Selector-Switch

Use what tubes and speaker you have for now and wire the amp for the highest impedence.

Soldering is going to require some heat for the copper grounding shield so it takes a rather large iron for this. Mine is quite old and large unit infact I’m not even sure where it went to.