Skip to Main Content
Tube Amp Network, home of the Two Stroke Logo Tube Amp Network, home of the Two Stroke Logo
  • Home
  • Two Stroke
  • WIKI
  • Forum
  • Resources
  • Amp Shop
  • Home
  • Two Stroke
  • WIKI
  • Forum
  • Resources
  • Amp Shop

joewilly

Profile picture of joewilly

@joewilly

Active 2 years, 9 months ago
  • Activity
  • Profile
  • Friends 0
  • Forums
  • Album
  • Personal
  • Mentions
  • Favorites
  • Friends
  • Profile picture of joewilly

    joewilly started the topic Best Power tube 6L6 or KT66? in the forum TAN Offers 2 years, 9 months ago

    Best tube chose 6L6 orKT66

  • Profile picture of joewilly

    joewilly replied to the topic output tube changeout in the forum 2 Stroke Amplifier Design and Building 10 years, 2 months ago

    I had similar problem with soldering to back of pots. I SCORED SURFACE WITH 220 GRIT SANDPAPER AND USED SOLDER PASTE FLUX AND IT WORKED OUT GREAT. HOPE THIS WILL HELP YOU OUT.

  • Profile picture of joewilly

    joewilly replied to the topic output tube changeout in the forum 2 Stroke Amplifier Design and Building 10 years, 2 months ago

    I had similar problem with soldering to back of pots. I SCORED SURFACE WITH 220 GRIT SANDPAPER AND USED SOLDER PASTE FLUX AND IT WORKED OUT GREAT. HOPE THIS WILL HELP YOU OUT.

  • Profile picture of joewilly

    joewilly replied to the topic output tube changeout in the forum 2 Stroke Amplifier Design and Building 10 years, 2 months ago

    I had similar problem with soldering to back of pots. I SCORED SURFACE WITH 220 GRIT SANDPAPER AND USED SOLDER PASTE FLUX AND IT WORKED OUT GREAT. HOPE THIS WILL HELP YOU OUT.

  • Profile picture of joewilly

    joewilly replied to the topic output tube changeout in the forum 2 Stroke Amplifier Design and Building 10 years, 2 months ago

    I had similar problem with soldering to back of pots. I SCORED SURFACE WITH 220 GRIT SANDPAPER AND USED SOLDER PASTE FLUX AND IT WORKED OUT GREAT. HOPE THIS WILL HELP YOU OUT.

  • Profile picture of joewilly

    joewilly replied to the topic output tube changeout in the forum 2 Stroke Amplifier Design and Building 10 years, 2 months ago

    I had similar problem with soldering to back of pots. I SCORED SURFACE WITH 220 GRIT SANDPAPER AND USED SOLDER PASTE FLUX AND IT WORKED OUT GREAT. HOPE THIS WILL HELP YOU OUT.

  • Profile picture of joewilly

    joewilly replied to the topic output tube changeout in the forum 2 Stroke Amplifier Design and Building 10 years, 2 months ago

    Bill,
    I read your story of whoas. I had a few problems when I first fired up my 2 Stroke amp.I had a problem with the 9 pin preamp socket. Two of the pins were shorting against each other. Had to bend one pin and trim
    excess wire protruding thru the pin.
    sounds like you have the problem solved. Enjoy the tunes.
    Joewilly

  • Profile picture of joewilly

    joewilly replied to the topic output tube changeout in the forum 2 Stroke Amplifier Design and Building 10 years, 2 months ago

    Bill,
    I read your story of whoas. I had a few problems when I first fired up my 2 Stroke amp.I had a problem with the 9 pin preamp socket. Two of the pins were shorting against each other. Had to bend one pin and trim
    excess wire protruding thru the pin.
    sounds like you have the problem solved. Enjoy the tunes.
    Joewilly

  • Profile picture of joewilly

    joewilly replied to the topic output tube changeout in the forum 2 Stroke Amplifier Design and Building 10 years, 2 months ago

    Bill,
    I read your story of whoas. I had a few problems when I first fired up my 2 Stroke amp.I had a problem with the 9 pin preamp socket. Two of the pins were shorting against each other. Had to bend one pin and trim
    excess wire protruding thru the pin.
    sounds like you have the problem solved. Enjoy the tunes.
    Joewilly

  • Profile picture of joewilly

    joewilly replied to the topic output tube changeout in the forum 2 Stroke Amplifier Design and Building 10 years, 2 months ago

    Bill,
    I read your story of whoas. I had a few problems when I first fired up my 2 Stroke amp.I had a problem with the 9 pin preamp socket. Two of the pins were shorting against each other. Had to bend one pin and trim
    excess wire protruding thru the pin.
    sounds like you have the problem solved. Enjoy the tunes.
    Joewilly

  • Profile picture of joewilly

    joewilly replied to the topic output tube changeout in the forum 2 Stroke Amplifier Design and Building 10 years, 2 months ago

    Bill,
    I read your story of whoas. I had a few problems when I first fired up my 2 Stroke amp.I had a problem with the 9 pin preamp socket. Two of the pins were shorting against each other. Had to bend one pin and trim
    excess wire protruding thru the pin.
    sounds like you have the problem solved. Enjoy the tunes.
    Joewilly

  • Profile picture of joewilly

    joewilly replied to the topic Re: static when turning on amp in the forum 2 Stroke Amplifier Design and Building 10 years, 4 months ago

    Robin,
    I pulled out the tubes and put them back in and the static disappeared.
    Thanks for the help

  • Profile picture of joewilly

    joewilly replied to the topic Re: static when turning on amp in the forum 2 Stroke Amplifier Design and Building 10 years, 4 months ago

    Robin,
    I pulled out the tubes and put them back in and the static disappeared.
    Thanks for the help

  • Profile picture of joewilly

    joewilly replied to the topic Re: static when turning on amp in the forum 2 Stroke Amplifier Design and Building 10 years, 4 months ago

    Robin,
    I pulled out the tubes and put them back in and the static disappeared.
    Thanks for the help

  • Profile picture of joewilly

    joewilly replied to the topic Re: static when turning on amp in the forum 2 Stroke Amplifier Design and Building 10 years, 4 months ago

    Robin,
    I pulled out the tubes and put them back in and the static disappeared.
    Thanks for the help

  • Profile picture of joewilly

    joewilly replied to the topic Re: static when turning on amp in the forum 2 Stroke Amplifier Design and Building 10 years, 4 months ago

    Robin,
    I pulled out the tubes and put them back in and the static disappeared.
    Thanks for the help

  • Profile picture of joewilly

    joewilly replied to the topic Two Stroke Cabinet Plans in the forum 2 Stroke Amplifier Design and Building 10 years, 4 months ago

    I made my own amplifier cabinet based on Dave Hunters measurements. He suggested 20 inches long, 16 inches high and 10 inches deep. Based on your woodworking skills it is not too difficult. I mitered the corners and I used wood bisqits to secure corners with wood glue. I used popular a semi hardwood which had to be glued together on edge to get…[Read more]

  • Profile picture of joewilly

    joewilly replied to the topic Two Stroke Cabinet Plans in the forum 2 Stroke Amplifier Design and Building 10 years, 4 months ago

    I made my own amplifier cabinet based on Dave Hunters measurements. He suggested 20 inches long, 16 inches high and 10 inches deep. Based on your woodworking skills it is not too difficult. I mitered the corners and I used wood bisqits to secure corners with wood glue. I used popular a semi hardwood which had to be glued together on edge to get…[Read more]

  • Profile picture of joewilly

    joewilly replied to the topic Two Stroke Cabinet Plans in the forum 2 Stroke Amplifier Design and Building 10 years, 4 months ago

    I made my own amplifier cabinet based on Dave Hunters measurements. He suggested 20 inches long, 16 inches high and 10 inches deep. Based on your woodworking skills it is not too difficult. I mitered the corners and I used wood bisqits to secure corners with wood glue. I used popular a semi hardwood which had to be glued together on edge to get…[Read more]

  • Profile picture of joewilly

    joewilly replied to the topic Two Stroke Cabinet Plans in the forum 2 Stroke Amplifier Design and Building 10 years, 4 months ago

    I made my own amplifier cabinet based on Dave Hunters measurements. He suggested 20 inches long, 16 inches high and 10 inches deep. Based on your woodworking skills it is not too difficult. I mitered the corners and I used wood bisqits to secure corners with wood glue. I used popular a semi hardwood which had to be glued together on edge to get…[Read more]

  • Load More

LOGIN

Log In
Register Lost Password

RECENT TOPICS

  • Hardware
  • Does 290AX need an artificial center tap?
  • New Guy with Capacitor Question
  • High(er) Voltage
  • 2 Stroke Updates

TWO STROKE KITS

  • Two Stroke tube amp Kit no speakers Two Stroke Tube Amp Kit (no speakers) $575.00
  • Two Stroke tube Amplifier Kit with Jensen Speakers Two Stroke Tube Amplifier Kit with Speakers $650.00
  • Are you a member?
  • Forgot Password
  • Home
  • Two Stroke
  • WIKI
  • Forum
  • Resources
  • Amp Shop

© 2023 Renovo Amp Works Co. Site design by Firebrand Creative.

Loading...
Loading...