Home › Forums › Design and Building › Effects Design and Construction › AX84 Variable Bias › Re: Re: AX84 Variable Bias
May 29, 2011 at 1:19 am
#5471
DeepBlue
Participant
Awesome ! I agree great info. I realize also now that its when my master is up that the current goes too high for the tube. So I will check out both the grid leak resistor and make sure I have my tube biased correctly. It was a bit hot I think especially at the high volumes. I will post what I find this weekend! Thanks again. I did notice some other set ups had an extra resistor in series and I wondered why…now I know.
Just a quick note, sorry for the dumb question but is this going to be on the screen grid or control grid? Pin 4 or pin5?