Home › Forums › Design and Building › 2 Stroke Amplifier Design and Building › Impedance switch wiring › Re: Re: Impedance switch wiring
December 30, 2014 at 10:00 pm
#6031
s3mamill
Participant
Thanks for your reply Robin. DH says that most switches like this are wired backwards (i.e. the yellow wire is on the right pole, but its engaged when the switch bat is to the left). Since you have used this switch before, can you tell me if its the same in this case. I wouldn’t know how to tell on my own if the impedance is correct (I don’t have a multimeter).