Home › Forums › Design and Building › 2 Stroke Amplifier Design and Building › Older kit, need coherent instructions › Reply To: Older kit, need coherent instructions
February 28, 2021 at 7:45 pm
#8386
YankeeDespot
Participant
Hi,
I think we’re mostly on the same page. I have the center tap done, and my low voltage ac is ok. The problem is that there’s 330ac on the yellow wires going into rectifier tube pins 2&8, but no power coming out of pin 8 to the first filter cap. I have a white cloth covered wire going from pin 8 to the first cap and on the same post, the 5w/10k resistor.
So, assuming that’s wired right, I’m assuming the rectifier tube is bad. Agree?
Thanks a lot. I’m gonna get this sucker runnin!
Doug