Home › Forums › Design and Building › Effects Design and Construction › Power Transformer wiring › Re: Re: Power Transformer wiring
April 7, 2015 at 2:37 am
#6066
Action Figure Studios
Participant
Robin,
Thanks so much. Still learning to read the schematic but it helps to have your words . If I understand correctly, the green/yellow, if supplied, is the center-tap and would not require the pair of 100ohm resistors. This was the piece of info that I was missing in my understanding.
Great!
Now all I have to do is add the two 1M resistors from S1 and S2 to ground.
I think I’ve got it now!