Home › Forums › Design and Building › 2 Stroke Amplifier Design and Building › Wires in the Two-Stroke kit › Re: Re: Wires in the Two-Stroke kit

July 4, 2012 at 11:26 am #5662
Robin
Participant

Check out this example of an eyelet board Two Stroke:
[attachment=60]alanstwostroke.jpg[/attachment]
This is from Alan D.’s photo album here on the TAN site. Building neat and clean allows you to find issues and do mods more easily later on.
Note the 68k resistor between the shielded cable and the input jack.